Clamping tools accessories
OmniFix Pin set for metrologist vises
Suitable for all OmniFix metrologist vises Wide range of clamping options Better accessibility due to higher clamping horizontal clamping of cylindrical partsApplication:Clamping pins expand the clamping possibilities of standard clamping devices enormously. The pins are 20 mm longer than the standard pins and thus ensure a greater distance between the top of the jaw and the component. However, not only the better accessibility is an advantage, but also the possibility to clamp complex geometries in a simple and standardized way.
Among other things, this set offers the possibility of horizontal clamping of cylindrical components with maximum accessibility. The enclosed unmachined pins can be used as a stop and for internal machining.
- Higher flexibility
- Better accessibility
- Enables the clamping of cylinder shapes
- Application
- Tactile
- Product Type
- Set
- Outer dimensions: Ø4 x 50 mm
- Height above jaw top: 37 mm
Scope of delivery:
- 1 set = 4 pins with step (3mm)
- 1 set = 4 double stepped pins (Ø1 x 1 mm and Ø2 x 5 mm)
- 1 set = 2 prism jaws right
- 1 set = 2 prism jaws left
- 1 set = 2 unmachined pins - length 60 mm
Product note
Locating holes in the respective vice jaws must be checked regularly for dirt or damage to ensure easy clearance-free insertion of the pins.