OmniFix Three-jaw chuck DIN 6350 for rotary table application Ø125 mm product photo Front View L
OmniFix Three-jaw chuck DIN 6350 for rotary table application Ø125 mm product photo

Tactile

OmniFix Three-jaw chuck DIN 6350 for rotary table application Ø125 mm

000000-0642-565
£ 2,060.00excl. VAT
Available
pcs
Quote Inquiry
Details
Material
Steel

Benefits:

  • 3-jaw chuck DIN 6350 for rotary table applications
  • Corrision protected
  • With ergonomic clamping tool and torque wrench
  • With adapter plate for ZEISS grid plates and pallets
  • Optimum flexibility through the use of interchangeable jaws

Application:

Three-jaw chucks are mainly used for clamping cylindrical or ring-shaped parts at higher clamping forces. Due to the radial clamping of rim-type chucks, damage to the rotary table can occur at higher forces. Due to the central clamping via a kind of knurled nut, which is inserted into the inner square of the chuck, no radial forces occur. This means that the components can be clamped exactly with the required clamping force. With interchangeable jaws you can easily adapt the lathe chuck to your requirements.

Special jaws manufactured in-house can also be adapted. The versions with a base plate allow easy mounting on ZEISS rotary tables.

Product information:

  • Body made of high-strength steel, corrosion protected, silver
  • Outer diameter Ø125 mm
  • Through hole Ø32 mm
  • Height base body 69 mm 
  • Clamping tool, steel, galvanized
  • Outer diameter approx. 36 mm, length approx. 20 mm
  • Repeat clamping accuracy 0.025 mm
  • Torque max. 80 Nm
  • Total clamping force max.31±15% kN
  • Weight approx. 5.5 kg
  • Clamping range: Turning jaws 3 – 125 mm, Drill jaws 3 – 123 mm
  • Largest swing diameter (with max. clamping diameter) 157 mm
  • Adapter plate made of aluminium, hard coated, black
  • Outer diameter 200 mmFastening possibility with M8 - Ø180 mm / 120°

Scope of delivery:

  • 1 set = 3 drilling jaws, corrosion-protected, stepped outwards
  • 1 set = 3 rotating jaws, corrosion-protected, stepped inwards
  • 1 turnbuckle 4-kt- SW8 - ½ knurled
  • 1 ratchet ½ switchable
  • 1 set of M8 mounting screws with sliding blocks

Product note:

To maintain the function and quality of the chuck, it must be serviced at regular intervals. Chuck must be as free of fast and silicone as possible.

Recently Viewed